# Account and Transaction API Profile - v3.1.11

# Overview

The Account and Transaction API Profile describes the flows and common functionality for the Accounts and Transaction API, which allows an Account Information Service Provider ('AISP') to:

  • Register an intent to retrieve account information by creating an "account access consent". This registers the data "permissions", expiration and historical period allowed for transactions / statements - that the customer (PSU) has consented to provide to the AISP; and
  • Subsequently, retrieve account and transaction data.

This profile should be read in conjunction with a compatible Read/Write Data API Profile which provides a description of the elements that are common across all the Read/Write Data APIs, and compatible individual resources.

# Document Structure

This document consists of the following parts:

Overview: Provides an overview of the profile.

Basics: Identifies the flows, release management and permission model.

Security & Access Control: Specifies the means for AISPs and PSUs to authenticate themselves and provide consent.

Data Model: Documents mappings and enumerations that apply to all the end-points.

Alternative Flows: Documents rules for alternative flows.

# Resources

Each of the Account and Transaction API resources are documented in the Resources and Data Models / AISP area of the specification. Each resource is documented with:

  • Endpoints
    • The API endpoints available for the resource.
  • Data Model
    • Resource definition.
    • UML diagram.
    • Permissions as they relate to accessing the resource.
    • Data dictionary - which defines fields, re-usable classes, mandatory (1..1) or conditional (0..1) as defined in the Design Principles section, and enumerations.
  • Usage Examples

# Basics

# Overview

The figure below provides a general outline of an account information request and flow using the Account Info APIs.

Accounts and Transactions Flow

# Steps

Step 1: Request Account Information

  • This flow begins with a PSU consenting to allow an AISP to access account information data.

Step 2: Setup Account Access Consent

  • The AISP connects to the ASPSP that services the PSU's account(s) and creates an account-access-consent resource. This informs the ASPSP that one of its PSUs is granting access to account and transaction information to an AISP. The ASPSP responds with an identifier for the resource (the ConsentId - which is the intent identifier). This step is carried out by making a POST request to / account-access-consents endpoint.
  • The account-access-consent resource will include these fields below - which describe the data that the PSU has consented with the AISP:
    • Permissions - a list of data clusters that have been consented for access.
    • Expiration Date - an optional expiration for when the AISP will no longer have access to the PSU's data.
    • Transaction Validity Period - the From/To date range which specifies a historical period for transactions and statements which may be accessed by the AISP.
  • An AISP may be a broker for data to other parties, and so it is valid for a PSU to have multiple account-access-consents for the same accounts, with different consent/authorisation parameters agreed.

Step 3: Authorise Consent

  • The AISP requests the PSU to authorise the consent. The ASPSP may carry this out by using a redirection flow or a decoupled flow .
    • In a redirection flow, the AISP redirects the PSU to the ASPSP.
      • The redirect includes the ConsentId generated in the previous step.
      • This allows the ASPSP to correlate the account-access-consent that was setup.
      • The ASPSP authenticates the PSU.
      • The ASPSP updates the state of the account-access-consent resource internally to indicate that the account access consent has been authorised.
      • Once the consent has been authorised, the PSU is redirected back to the AISP.
    • In a decoupled flow, the ASPSP requests the PSU to authorise consent on an authentication device that is separate from the consumption device on which the PSU is interacting with the AISP.
      • The decoupled flow is initiated by the AISP calling a back-channel authorisation request.
      • The request contains a 'hint' that identifies the PSU, paired with the consent to be authorised.
      • The ASPSP authenticates the PSU and updates the state of the account-access-consent resource internally to indicate that the account access consent has been authorised.
      • Once the consent has been authorised, the ASPSP can make a callback to the AISP to provide an access token.
  • The principle we have agreed is that consent is managed between the PSU and the AISP - so the account-access-consent details must not be changed (with the ASPSP) in this step. The PSU will only be able to authorise or reject the account-access-consent details in its entirety.
  • During authorisation, the PSU selects accounts that are authorised for the AISP request (in the ASPSP's banking interface).

Step 4: Request Data

  • This is carried out by making a GET request the relevant resource.
  • The unique AccountId(s) that are valid for the account-access-consent will be returned with a call to GET /accounts. This will always be the first call once an AISP has a valid access token.

# Sequence Diagram

Diagram source
participant PSU
participant AISP
participant ASPSP Authorisation Server
participant ASPSP Resource Server

note over PSU, ASPSP Resource Server
    Step 1: Request account information
end note
PSU -> AISP: Get account/transaction information

note over PSU, ASPSP Resource Server
    Step 2: Setup account access consent
end note
AISP <-> ASPSP Authorisation Server: Establish TLS 1.2 MA
AISP -> ASPSP Authorisation Server: Initiate Client Credentials Grant
ASPSP Authorisation Server -> AISP: access-token
AISP <-> ASPSP Resource Server: Establish TLS 1.2 MA
AISP -> ASPSP Resource Server: POST /account-access-consents
state over ASPSP Resource Server: Consent Status: AwaitingAuthorisation
ASPSP Resource Server -> AISP: HTTP 201 (Created), ConsentId

note over PSU, ASPSP Resource Server
Step 3: Authorise consent
end note
alt Redirection (Using Authorization Code Grant)
        AISP -> PSU: HTTP 302 (Found), Redirect (ConsentId)
        PSU -> ASPSP Authorisation Server: Follow redirect (ConsentId)
        PSU <-> ASPSP Authorisation Server: authenticate
        PSU <-> ASPSP Authorisation Server: SCA if required
        PSU <-> ASPSP Authorisation Server: select accounts
        state over ASPSP Resource Server: Consent Status: Authorised
        ASPSP Authorisation Server -> PSU: HTTP 302 (Found), Redirect (authorization-code)
        PSU -> AISP: Follow redirect (authorization-code)
        AISP <-> ASPSP Authorisation Server: Establish TLS 1.2 MA
        AISP -> ASPSP Authorisation Server: Exchange authorization-code for access token
        ASPSP Authorisation Server -> AISP: access-token
    else Decoupled (Using CIBA)
        AISP -> ASPSP Authorisation Server: POST /bc-authorize (login_hint_token)
        ASPSP Authorisation Server -> AISP: OK

        PSU -> ASPSP Authorisation Server: Authorise (Consent Id)
        PSU <-> ASPSP Authorisation Server: authenticate
        PSU <-> ASPSP Authorisation Server: SCA if required
        PSU <-> ASPSP Authorisation Server: select accounts
        state over ASPSP Resource Server: Consent Status: Authorised

        alt Using callback
                ASPSP Authorisation Server -> AISP: Callback (authorization-code)
                AISP <-> ASPSP Authorisation Server: Establish TLS 1.2 MA
                AISP -> ASPSP Authorisation Server: Exchange authorization-code for access token
                ASPSP Authorisation Server -> AISP: access-token
        else Using polling
                AISP <-> ASPSP Authorisation Server: Establish TLS 1.2 MA
                AISP -> ASPSP Authorisation Server: Poll at /token using auth-req-id
                ASPSP Authorisation Server -> AISP: access-token
        end alt
end alt



note over PSU, ASPSP Resource Server
Step 4: Request data
end note
AISP <-> ASPSP Resource Server: Establish TLS 1.2 MA
AISP -> ASPSP Resource Server: GET /accounts
ASPSP Resource Server -> AISP: HTTP 200 (OK), List of accounts containing AccountId(s)


AISP -> ASPSP Resource Server: GET /accounts/{AccountId}/transactions
ASPSP Resource Server -> AISP: HTTP 200 (OK), List of transactions
option footer=bar

# Idempotency

The API endpoints for creating account-access-consent resources are not idempotent.

If a time-out error occurs - then we would expect an AISP to create a new account-access-consent resource - rather than try with the same resource.

# Release Management

This section overviews the release management and versioning strategy for the Account and Transaction API.

The account-access-consent resource is referred to as an account-request resource in v1 and v2 of this specification. For clarity, it has been generalised to 'Consent' in the detail below.

# POST
  • An AISP must not create a Consent on a newer version, and use it on a previous version
    • E.g., A ConsentId for an account-access-consent created in v3, must not be used to access v2 endpoints.
# GET
  • An AISP must not access a Consent on an older version, via the Id for a Consent created in a newer version:
    • E.g., An account-access-consent created in v3 accessed via v2 account-request.
  • An ASPSP must allow a Consent to be accessed in a newer version.
  • An ASPSP must ensure Permissions set associated with a Consent are unchanged when accessed in a different version:
    • E.g., An account-request created in v2 will have the same details when accessed via v2 and v3 (as an account-access-consent).
  • An ASPSP must ensure a Consent's fields are unchanged when accessed in a different version.
  • An ASPSP may allow expired Consents to be accessed in a newer version.
  • An ASPSP may choose to populate new fields introduced in a resource from previous version sensible defaults (if mandatory) or not populate at all (if not mandatory):
    • E.g., OBReadResponse1/Data/StatusUpdateDateTime introduced in v2 accessed with v1 AccountRequestId can be populated with Last accessed date time, if not already available in the system of records.
# DELETE
  • An AISP must not delete a Consent on an older version, via an Id for a Consent created in a newer version:
    • E.g., An account-access-consent is created in v3, and request DELETE on v2.
  • An ASPSP must support deleting a Consent from a previous version via a newer version:
    • E.g., An account-request is created in v2, and request DELETE on v3.

# Account Information Resources

# GET
  • An AISP may use a token that is bound to a Consent in a previous version, to access an endpoint of a newer version.
  • An AISP may use an Id for a Consent created in a previous version to retrieve Account Information resources in a newer version:
    • E.g., AccountRequestId from v2 can be used as ConsentId in v3, to GET /accounts.
  • An AISP must not use an Id for a Consent from a newer version to access Account Information resources in a previous version:
    • E.g., ConsentId for an account-access-consent created in v3, must not be used to access v2 Account Information endpoints.
  • An AISP must not use an Id for a Consent from a previous version to access a resource introduced in a newer version (as the Consent will not have Permissions required to access the new resource).
  • An ASPSP must allow an AISP to use an Id for a Consent from a previous version to access Account Information resource endpoints in a newer version:
    • E.g., AccountRequestId created in v2 must be allowed to access Account Information resource endpoints in v3.
  • An ASPSP must reject the request to access a resource, for which a Consent's Permissions set does not permit.
  • An ASPSP may choose to populate new fields introduced in a resource from previous version sensible defaults (if mandatory) or not populate at all:
    • E.g., OBReadResponse1/Data/StatusUpdateDateTime introduced in Version2 accessed with V1 AccountRequestId can be populated with Last accessed date time, if not already available in the system of records.

# Security & Access Control

# Scopes

The access tokens required for accessing the Account Info APIs must have at least the following scope:

accounts: Ability to read Accounts information

# Grants Types

AISPs must use a client credentials grant to obtain a token to access the account-access-consents resource. In the specification, this grant type is referred to as "Client Credentials".

AISPs must use an authorization code grant using a redirect or decoupled flow to obtain a token to access all other resources. In the specification, this grant type is referred to as "Authorization Code".

The AISP must create an account-access-consent resource through a POST operation. This resource indicates the consent that the AISP claims it has been given by the PSU to retrieve account and transaction information. At this stage, the consent is not yet authorised as the ASPSP has not yet verified this claim with the PSU.

The ASPSP responds with a ConsentId. This is the intent-id that is used when initiating the authorization code grant (as described in the Trust Framework).

As part of the consent authorization flow:

  • The ASPSP authenticates the PSU.
  • The ASPSP plays back the consent (registered by the AISP) back to the PSU - to get consent authorisation. The PSU may accept or reject the consent in its entirety (but not selectively).
  • The ASPSP presents the PSU with a list of accounts to which the consent will apply.

Once these steps are complete, the consent is considered to have been authorised by the PSU.

The Account Access Consent resource consists of the following fields, which together form the elements of the consent provided by the PSU to the AISP:

  • Permissions: The set of data clusters that the PSU has consented to allow the AISP to access.
  • ExpirationDateTime: The date-time up to which the consent is valid.
  • TransactionFromDateTime: The earliest point of the transaction / statement historical period that the PSU has consented to provide access to the AISP.
  • TransactionToDateTime: The last point of the transaction / statement historical period that the PSU has consented to provide access to the AISP.
# Permissions

Permissions codes will be used to limit the data that is returned in response to a resource request.

When a permission is granted for a "Detail" permission code (e.g., ReadAccountsDetail) it implies that access is also granted to the corresponding "Basic" permission code (e.g., ReadAccountsBasic).

While it is duplication for a TPP to request a "Basic" permission code and the corresponding "Detail" permission code, it is not a malformed request, and the ASPSP must not reject solely on the basis of duplication.

The permissions array must contain at least ReadAccountsBasic or ReadAccountsDetail.

The following combinations of permissions are not allowed, and the ASPSP must reject these account-access-consents with a 400 response code:

  • Account Access Consents with an empty Permissions array.
  • Account Access Consents with a permission code that is not supported by the ASPSP (ASPSPs are expected to publish which API endpoints are supported).
  • Account Access Consents with a Permissions array that contains ReadTransactionsBasic but does not contain at least one of ReadTransactionsCredits and ReadTransactionsDebits.
  • Account Access Consents with a Permissions array that contains ReadTransactionsDetail but does not contain at least one of ReadTransactionsCredits and ReadTransactionsDebits.
  • Account Access Consents with a Permissions array that contains ReadTransactionsCredits but does not contain at least one of ReadTransactionsBasic and ReadTransactionsDetail
  • Account Access Consents with a Permissions array that contains ReadTransactionsDebits but does not contain at least one of ReadTransactionsBasic and ReadTransactionsDetail.
Permissions Endpoints Business Logic Data Cluster Description
ReadAccountsBasic /accounts
/accounts/{AccountId}
Ability to read basic account information
ReadAccountsDetail /accounts
/accounts/{AccountId}
Access to additional elements in the payload Ability to read account identification details
ReadBalances /balances
/accounts/{AccountId}/balances
Ability to read all balance information
ReadBeneficiariesBasic /beneficiaries
/accounts/{AccountId}/beneficiaries
Ability to read basic beneficiary details
ReadBeneficiariesDetail /beneficiaries
/accounts/{AccountId}/beneficiaries
Access to additional elements in the payload Ability to read account identification details for the beneficiary
ReadDirectDebits /direct-debits
/accounts/{AccountId}/direct-debits
Ability to read all direct debit information
ReadTransactionsBasic /transactions
/accounts/{AccountId}/transactions
/accounts/{AccountId}/statements/{StatementId}/transactions
Permissions must also include at least one of:

  • ReadTransactionsCredits
  • ReadTransactionsDebits
  • Ability to read basic transaction information
    ReadTransactionsDetail /transactions
    /accounts/{AccountId}/transactions
    /accounts/{AccountId}/statements/{StatementId}/transactions
    Access to additional elements in the payload

    Permissions must also include at least one of:

  • ReadTransactionsCredits
  • ReadTransactionsDebits
  • Ability to read transaction data elements which may hold silent party details
    ReadTransactionsCredits /transactions
    /accounts/{AccountId}/transactions
    /accounts/{AccountId}/statements/{StatementId}/transactions
    Access to credit transactions.

    Permissions must also include one of:

  • ReadTransactionsBasic
  • ReadTransactionsDetail
  • Ability to read only credit transactions
    ReadTransactionsDebits /transactions
    /accounts/{AccountId}/transactions
    /accounts/{AccountId}/statements/{StatementId}/transactions
    Access to debit transactions.

    Permissions must also include one of:

  • ReadTransactionsBasic
  • ReadTransactionsDetail
  • Ability to read only debit transactions
    ReadStatementsBasic /statements
    /accounts/{AccountId}/statements
    Ability to read basic statement details
    ReadStatementsDetail /statements
    /accounts/{AccountId}/statements
    /accounts/{AccountId}/statements/{StatementId}/file
    Access to additional elements in the payload

    Access to download the statement file (if the ASPSP makes this available).
    Ability to read statement data elements which may leak other information about the account
    ReadProducts /products
    /accounts/{AccountId}/product
    Ability to read all product information relating to the account
    ReadOffers /offers
    /accounts/{AccountId}/offers
    Ability to read all offer information
    ReadParty /accounts/{AccountId}/party
    /accounts/{AccountId}/parties
    Ability to read party information on the account owner.
    ReadPartyPSU /party Ability to read party information on the PSU logged in.
    ReadScheduledPaymentsBasic /scheduled-payments
    /accounts/{AccountId}/scheduled-payments
    Ability to read basic statement details
    ReadScheduledPaymentsDetail /scheduled-payments
    /accounts/{AccountId}/scheduled-payments
    Access to additional elements in the payload
    ReadPAN All API endpoints where PAN is available as a structured field Request to access to PAN in the clear Request to access PAN in the clear across the available endpoints.

    If this permission code is not in the account-access-consent, the AISP will receive a masked PAN.

    While an AISP may request to access PAN in the clear, an ASPSP may still respond with a masked PAN if:

  • The ASPSP does not display PAN in the clear in existing online channels
  • The ASPSP takes a legal view to respond with only the masked PAN
  • ASPSP should return last 4 digits unmasked, or
  • ASPSP should return at max first 6 and last 4 digits unmasked. e.g. 5555 **** **** 4444, **** **** **** 4444 etc
  • # Detail Permissions

    The additional elements that are granted for "Detail" permissions are listed in this section.

    All other fields (other than these fields listed) are available with the "Basic" Permission access.

    Permission - Detail Codes Data Element Name Occurrence XPath
    ReadAccountsDetail Account 0..1 OBReadAccount3/Data/Account/Account
    ReadAccountsDetail Servicer 0..1 OBReadAccount3/Data/Account/Servicer
    ReadBeneficiariesDetail CreditorAgent 0..1 OBReadBeneficiary3/Data/Beneficiary/CreditorAgent
    ReadBeneficiariesDetail CreditorAccount 0..1 OBReadBeneficiary3/Data/Beneficiary/CreditorAccount
    ReadStandingOrdersDetail CreditorAgent 0..1 OBReadStandingOrder6/Data/StandingOrder/CreditorAgent
    ReadStandingOrdersDetail CreditorAccount 0..1 OBReadStandingOrder6/Data/StandingOrder/CreditorAccount
    ReadTransactionsDetail TransactionInformation 0..1 OBReadTransaction4/Data/Transaction/TransactionInformation
    ReadTransactionsDetail Balance 0..1 OBReadTransaction4/Data/Transaction/Balance
    ReadTransactionsDetail MerchantDetails 0..1 OBReadTransaction4/Data/Transaction/MerchantDetails
    ReadTransactionsDetail CreditorAgent 0..1 OBReadTransaction4/Data/Transaction/CreditorAgent
    ReadTransactionsDetail CreditorAccount 0..1 OBReadTransaction4/Data/Transaction/CreditorAccount
    ReadTransactionsDetail DebtorAgent 0..1 OBReadTransaction4/Data/Transaction/DebtorAgent
    ReadTransactionsDetail DebtorAccount 0..1 OBReadTransaction4/Data/Transaction/DebtorAccount
    ReadStatementsDetail StatementAmount 0..* OBReadStatement1/Data/Statement/StatementAmount
    ReadScheduledPaymentsDetail CreditorAgent 0..1 OBReadScheduledPayment2/Data/ScheduledPayment/CreditorAgent
    ReadScheduledPaymentsDetail CreditorAccount 0..1 OBReadScheduledPayment2/Data/ScheduledPayment/CreditorAccount

    In addition the ReadStatementsDetail is required to access the statement file download via: /accounts/{AccountId}/statements/{StatementId}/file

    Example behaviour of the Permissions for the ReadAccountsBasic and ReadAccountsDetail codes is as follows:

    # Reversing Entries

    It is expected that transactions will be returned in the payload irrespective of whether they are reversing entries, as long as the PSU has provided consent for that type of transaction.

    If the PSU has provided permission for ReadTransactionsCredits, the ASPSP must include all credits, including debit reversals.

    If the PSU has provided permission for ReadTransactionsDebits, the ASPSP must include all debits, including credit reversals.

    # Expiration Date Time

    The ExpirationDateTime is an optional field which specifies the expiration for AISP access to the PSU's data.

    The field is optional as the consent for AISP access to a PSU's data may be indefinite. If SCA is applied in permitted circumstances, the same account-access-consent resource will be re-authenticated with the same ExpirationDateTime as the original request.

    The ExpirationDateTime applies to all Permissions (data clusters) being consented.

    ASPSP must not modify the ExpirationDateTime for an account access consent, and must leave it as provided by the TPP, i.e. null/absent. The change in ExpirationDateTime by ASPSP may be considered as altering the PSU Consent.

    # Transaction To/From Date Time

    The TransactionToDateTime and the TransactionFromDateTime specify the period for consented transaction and/or statement history. Both the fields are optional and one may be specified without the other.

    The AISP must be restricted to accessing transactions within this period when accessing the transactions resource.

    The AISP must be restricted to accessing statements which are completely within this period when accessing the statements resource.

    The Account Access Consent resource may have one of the following status codes after authorisation has taken place:

    Status Description
    1 Authorised The account access consent has been successfully authorised.
    2 Rejected The account access consent has been rejected.
    3 Revoked The account access consent has been revoked via the ASPSP interface. This status is not applicable for the resource created after Ver 3.1.4.

    Account Access Consents are long-lived consents.

    A PSU can re-authenticate an Account Access Consent if:

    • The account-access-consent has a status of Authorised and
    • The ExpirationDateTime of the account-access-consent, if specified, has not elapsed.

    Where there is no change in the consent parameters required, TPPs should perform a re-authentication / refresh upon the original consent using the same intent-id as before, instead of issuing a new, duplicate consent.

    A TPP and PSU may have multiple consents at any point in time.

    A PSU may revoke consent for accessing account information at any point in time.

    The PSU may request the AISP to revoke consent that it has authorised. If consent is revoked with the AISP:

    • The AISP must cease to access the APIs at that point.
    • The AISP must call the DELETE operation on the account-access-consent resource (before confirming consent revocation with the PSU) as soon as is practically possible, to indicate to the ASPSP that the PSU has revoked consent.

    # Access Revocation

    A PSU may revoke AISP's access directly with the ASPSP, via the access dashboard. In such a situation:

    • The ASPSP must take the necessary action to revoke access e.g. by revoking/expiring the access token provided to the AISP.
    • The status of the account-access-consent must remain unchanged and the AISP must be allowed to request PSU to re-authenticate the same account-access-consent resource.
    • Upon successful re-authentication by PSU, an ASPSP may issue new authorization code and subsequently new access token to the AISP.

    # Changes to Selected Account(s)

    The PSU must select the accounts to which the consent should be applied at the point of consent authorisation.

    Subsequent changes to the set of accounts to which the consent authorisation applies may be carried out directly with the ASPSP. The method for doing this lies in the competitive space and is not part of this specification.

    Additionally, the set of selected accounts may also change due to external factors. This includes (but is not limited to):

    • The account being closed.
    • The account is barred or frozen.
    • The beneficial owner of the account revokes the PSU's mandate or power of attorney to operate the account.

    In these scenarios, only the affected account is removed from the list of selected accounts. The ASPSP must not revoke authorisation to other accounts.

    # Account Switching

    In addition to the changes that may take place to a selected account, an account may be switched to another ASPSP through an account switching service such as CASS.

    In such a situation:

    • The ASPSP should indicate the switching status of the account on the accounts resources.
    • The ASPSP may chooose not to return any other resources related to an account that has switched on their corresponding end-points.

    # Risk Scoring Information

    Information for risk scoring and assessment will come via:

    • FAPI HTTP headers. These are defined in Section 6.3 (opens new window) of the FAPI specification and in the Headers section above.
    • Additional fields identified by the industry as business logic security concerns - which will be passed in the Risk section of the payload in the JSON object.

    No fields for business logic security concerns have been identified for the Account Info APIs.

    # Data Model

    # Using Meta to identify Available Transaction Period

    For Accounts & Transaction APIs, the Meta section in API responses may contain two additional fields to indicate the date range for which data has been returned.

    The transactions or statements for a particular range of dates may be excluded from the response because:

    • The ASPSP does not provide historical transactions / statements for that date range.
    • The PSU has not consented to transactions / statements for that date range.

    The absence of transactions / statements in the payload does not indicate that there were no transactions / statements during that period.

    To ensure that the data is interpreted correctly, the ASPSP may provide the date of the first available transaction and last available transaction as part of the response in the Meta section in the FirstAvailableDateTime and LastAvailableDateTime fields.

      "Meta": {
        "TotalPages": 1,
        "FirstAvailableDateTime": "2017-05-03T00:00:00+00:00",
        "LastAvailableDateTime": "2017-12-03T00:00:00+00:00"
      }
    

    # Mapping to Schemes & Standards

    The Account Info API resources, where possible, have been borrowed from the ISO 20022 camt.052 XML standard. However, has been adapted for APIs based as per our design principles.

    Deviations from the camt.052 XML standard are:

    • The camt.052 header section and trailer sections have been removed as these are not required for a RESTful API.
    • Resources have been identified and payload structures have been designed for these resources rather than a full message (i.e., camt.052) that encompasses all resources in a report format. This has meant we have designed separate endpoints and payloads to cover:
      • accounts
      • balances
      • beneficiaries
      • direct-debits
      • offers
      • party
      • products
      • standing-orders
      • statements
      • transactions
      • scheduled-payments
    • New payloads have been designed for beneficiaries, direct-debits, standing-orders, and products resources as these are not in the ISO 20022 standard (or the camt.052 message).
    • A DateTime element has been used instead of a complex choice element of Date and DateTime (across all API endpoints). Where time elements do not exist in ASPSP systems, the expectation is the time portion of the DateTime element will be defaulted to 00:00:00+00:00.
    • Variations for the accounts structure include:
      • Standardised inline with the Payment API account structures.
      • Contains elements to identify an account Nickname, SecondaryIdentification.
    • Variations for the balances structure include:
      • Adding a Type into the CreditLine section to allow for multiple credit line types affecting the available balance.
      • DateTime element has been specified instead of a complex choice of Date and DateTime.
    • Variations for the transactions structure include:
      • Renaming "entry" to "transaction" for consistency as this is the language used in the CMA Order and PSD2.
      • DateTime elements used instead of a complex choice of Date and DateTime.
      • Flattening of the structure for BankTransactionCode and ProprietaryBankTransactionCode.
      • Additional information for an AddressLine, MerchantDetails and a running Balance.

    # Enumerations

    # Static Enumerations

    Code Class Name Definition
    OBAccountStatus1Code Enabled Account can be used for its intended purpose.
    OBAccountStatus1Code Disabled Account cannot be used for its intended purpose, either temporarily or permanently.
    OBAccountStatus1Code Deleted Account cannot be used any longer.
    OBAccountStatus1Code ProForma Account is temporary and can be partially used for its intended purpose. The account will be fully available for use when the account servicer has received all relevant documents.
    OBAccountStatus1Code Pending Account change is pending approval.
    OBAddressTypeCode Business Address is the business address.
    OBAddressTypeCode Correspondence Address is the address where correspondence is sent.
    OBAddressTypeCode DeliveryTo Address is the address to which delivery is to take place.
    OBAddressTypeCode MailTo Address is the address to which mail is sent.
    OBAddressTypeCode POBox Address is a postal office (PO) box.
    OBAddressTypeCode Postal Address is the complete postal address.
    OBAddressTypeCode Residential Address is the home address.
    OBAddressTypeCode Statement Address is the address where statements are sent.
    OBBalanceType1Code ClosingAvailable Closing balance of amount of money that is at the disposal of the account owner on the date specified.
    OBBalanceType1Code ClosingBooked Balance of the account at the end of the pre-agreed account reporting period. It is the sum of the opening booked balance at the beginning of the period and all entries booked to the account during the pre-agreed account reporting period.
    OBBalanceType1Code ClosingCleared Closing balance of amount of money that is cleared on the date specified.
    OBBalanceType1Code Expected Balance, composed of booked entries and pending items known at the time of calculation, which projects the end of day balance if everything is booked on the account and no other entry is posted.
    OBBalanceType1Code ForwardAvailable Forward available balance of money that is at the disposal of the account owner on the date specified.
    OBBalanceType1Code Information Balance for informational purposes.
    OBBalanceType1Code InterimAvailable Available balance calculated in the course of the account servicer's business day, at the time specified, and subject to further changes during the business day. The interim balance is calculated on the basis of booked credit and debit items during the calculation time/period specified.
    OBBalanceType1Code InterimBooked Balance calculated in the course of the account servicer's business day, at the time specified, and subject to further changes during the business day. The interim balance is calculated on the basis of booked credit and debit items during the calculation time/period specified.
    OBBalanceType1Code InterimCleared Cleared balance calculated in the course of the account servicer's business day, at the time specified, and subject to further changes during the business day.
    OBBalanceType1Code OpeningAvailable Opening balance of amount of money that is at the disposal of the account owner on the date specified.
    OBBalanceType1Code OpeningBooked Book balance of the account at the beginning of the account reporting period. It always equals the closing book balance from the previous report.
    OBBalanceType1Code OpeningCleared Opening balance of amount of money that is cleared on the date specified.
    OBBalanceType1Code PreviouslyClosedBooked Balance of the account at the previously closed account reporting period. The opening booked balance for the new period has to be equal to this balance. Usage: the previously booked closing balance should equal (inclusive date) the booked closing balance of the date it references and equal the actual booked opening balance of the current date.
    OBCreditDebitCode Credit Operation is a credit
    OBCreditDebitCode Debit Operation is a debit
    OBEntryStatus1Code Booked Booked means that the transfer of money has been completed between account servicer and account owner Usage: Status Booked does not necessarily imply finality of money as this depends on other factors such as the payment system used, the completion of the end- to-end transaction and the terms agreed between account servicer and owner. Status Booked is the only status that can be reversed.
    OBEntryStatus1Code Pending Booking on the account owner's account in the account servicer's ledger has not been completed. Usage: this can be used for expected items, or for items for which some conditions still need to be fulfilled before they can be booked. If booking takes place, the entry will be included with status Booked in subsequent account report or statement. Status Pending cannot be reversed.
    OBEntryStatus1Code Rejected Transaction has been rejected. Typically used for indicating card transactions that have been rejected.
    OBExternalAccountSubType1Code ChargeCard Account sub-type is a Charge Card.
    OBExternalAccountSubType1Code CreditCard Account sub-type is a Credit Card.
    OBExternalAccountSubType1Code CurrentAccount Account sub-type is a Current Account.
    OBExternalAccountSubType1Code EMoney Account sub-type is an EMoney.
    OBExternalAccountSubType1Code Loan Account sub-type is a Loan.
    OBExternalAccountSubType1Code Mortgage Account sub-type is a Mortgage.
    OBExternalAccountSubType1Code PrePaidCard Account sub-type is a PrePaid Card.
    OBExternalAccountSubType1Code Savings Account sub-type is a Savings.
    OBExternalAccountType1Code Business Account type is for business.
    OBExternalAccountType1Code Personal Account type is for personal.
    OBExternalCardAuthorisationType1Code ConsumerDevice Card authorisation was via a Consumer Device Cardholder Verification Method (CDCVM).
    OBExternalCardAuthorisationType1Code Contactless Card authorisation was via Contactless.
    OBExternalCardAuthorisationType1Code None No card authorisation was used.
    OBExternalCardAuthorisationType1Code PIN Card authorisation was via PIN.
    OBExternalCardSchemeType1Code AmericanExpress AmericanExpress scheme.
    OBExternalCardSchemeType1Code Diners Diners scheme.
    OBExternalCardSchemeType1Code Discover Discover scheme.
    OBExternalCardSchemeType1Code MasterCard MasterCard scheme.
    OBExternalCardSchemeType1Code VISA VISA scheme.
    OBExternalLimitType1Code Available The amount of credit limit available to the account holder
    OBExternalLimitType1Code Credit The amount of a credit limit that has been agreed with the account holder
    OBExternalLimitType1Code Emergency The amount of an arranged lending limit that can be borrowed on top of pre-agreed lending, that has been agreed with the account holder
    OBExternalLimitType1Code Pre-Agreed The amount of an arranged lending limit that has been agreed with the account holder
    OBExternalLimitType1Code Temporary The amount of a temporary lending limit that has been agreed with the account holder
    OBExternalOfferType1Code BalanceTransfer Offer is a balance transfer.
    OBExternalOfferType1Code LimitIncrease Offer is a limit increase.
    OBExternalOfferType1Code MoneyTransfer Offer is a money transfer.
    OBExternalOfferType1Code Other Offer is of an other type.
    OBExternalOfferType1Code PromotionalRate Offer is a promotional rate.
    OBExternalPartyType1Code Delegate Party that has delegated access.
    OBExternalPartyType1Code Joint Party is a joint owner of the account.
    OBExternalPartyType1Code Sole Party is a sole owner of the account.
    OBExternalScheduleType1Code Arrival Scheduled payment date is specified as the arrival date for the recipient.
    OBExternalScheduleType1Code Execution Scheduled payment date is specified as the execution date.
    OBExternalStandingOrderStatus1Code Active The standing order is active.
    OBExternalStandingOrderStatus1Code Inactive The standing order is inactive.
    OBExternalStatementType1Code AccountClosure Final account closure statement.
    OBExternalStatementType1Code AccountOpening First statement provided for an account.
    OBExternalStatementType1Code Annual Annual statement report.
    OBExternalStatementType1Code Interim Adhoc or customised statement period.
    OBExternalStatementType1Code RegularPeriodic Regular pre-agreed reporting statement.

    # ISO Enumerations

    These following ISO Enumerations are used in the Accounts APIs.

    ISO Data Type Fields ISO Enumeration Values URL
    Min3Max4Text MerchantCategoryCode https://www.iso.org/standard/33365.html
    ActiveOrHistoricCurrencyCode Currency https://www.iso20022.org/external_code_list.page
    CountryCode Country https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2#Officially_assigned_code_elements
    ExternalBankTransactionFamily1Code BankTransactionCode/Code https://www.iso20022.org/external_code_list.page
    ExternalBankTransactionSubFamily1Code BankTransactionCode/SubCode https://www.iso20022.org/external_code_list.page

    # Namespaced Enumerations

    The enumerated values specified by Open Banking are documented in Swagger specification and Namespaced Enumerations page.

    # Alternative Flows

    Open Banking Specification doesn't provide a specific state modelling for Account Access Consent resource where the Authorisation cannot be completed by a Single Authoriser.

    It's up to ASPSP to engage with AISP/PSUs to enable them to facilitate the Account Access in such cases, with an alternative workflow, and the ASPSP must document the behaviour on their Developer Portal.