# International Standing Order Consents - v3.1.11

# Overview

The International Standing Order Consent resource is used by a PISP to register an intent to initiate an International Standing Order.

This resource description should be read in conjunction with a compatible Payment Initiation API Profile.

# Endpoints

Resource HTTP Operation Endpoint Mandatory ? Scope Grant Type Message Signing Idempotency Key Request Object Response Object
international-standing-order-consents POST POST /international-standing-order-consents Conditional payments Client Credentials Signed Request Signed Response Yes OBWriteInternationalStandingOrderConsent6 OBWriteInternationalStandingOrderConsentResponse7
international-standing-order-consents GET GET /international-standing-order-consents/{ConsentId} Mandatory (if resource POST implemented) payments Client Credentials Signed Response No NA OBWriteInternationalStandingOrderConsentResponse7

# POST /international-standing-order-consents

The API endpoint allows the PISP to ask an ASPSP to create a new international-standing-order-consent resource.

  • The POST action indicates to the ASPSP that an international standing order consent has been staged. At this point, the PSU may not have been identified by the ASPSP, and the request payload may not contain any information of the account that should be debited.
  • The endpoint allows the PISP to send a copy of the consent (between PSU and PISP) to the ASPSP for the PSU to authorise.
  • The ASPSP creates the international-standing-order-consent resource and responds with a unique ConsentId to refer to the resource.

# Status

The default Status is "AwaitingAuthorisation" immediately after the international-standing-order-consent has been created.

Status
AwaitingAuthorisation

# GET /international-standing-order-consents/{ConsentId}

A PISP can optionally retrieve a payment consent resource that they have created to check its status.

# Status

Once the PSU authorises the payment-consent resource - the Status of the payment-consent resource will be updated with "Authorised".

If the PSU rejects the consent or the international-standing-order-consent has failed some other ASPSP validation, the Status will be set to "Rejected".

Once an international-standing-orders has been successfully created using the international-standing-order-consent, the Status of the international-standing-order-consent will be set to "Consumed".

The available Status codes for the international-standing-order-consent resource are:

Status
AwaitingAuthorisation
Rejected
Authorised
Consumed

# State Model

The state model for the international-standing-order-consent resource follows the generic consent state model. However, does not use the "Revoked" status, as the consent for an international-standing-order is not a long-lived consent.

 image2018-5-18_10-24-21.png

The definitions for the Status:

Status Status Description
1 AwaitingAuthorisation The consent resource is awaiting PSU authorisation.
2 Rejected The consent resource has been rejected.
3 Authorised The consent resource has been successfully authorised.
4 Consumed The consented action has been successfully completed. This does not reflect the status of the consented action.

# Data Model

The data dictionary section gives the detail on the payload content for the International Standing Order API flows.

# Reused Classes

# OBInternationalStandingOrder4

This section describes the OBInternationalStandingOrder4 class which is reused as the Initiation object in the international-standing-order-consent resource.

# UML Diagram

 OBInternationalStandingOrder4

# Notes

For the OBInternationalStandingOrder4 Initiation object:

  • All elements in the Initiation payload that are specified by the PISP must not be changed via the ASPSP - as this is part of formal consent from the PSU.
  • If the ASPSP is able to establish a problem with payload or any contextual error during the API call, the ASPSP must reject the international-standing-order-consent request immediately.
  • If the ASPSP establishes a problem with the international-standing-order-consent after the API call, the ASPSP must set the Status of the international-standing-order-consent resource to Rejected.
  • The DebtorAccount is optional as the PISP may not know the account identification details for the PSU.
  • If the DebtorAccount is specified by the PISP and is invalid for the PSU, then the international-standing-order-consent will be set to Rejected after PSU authentication.
  • The CreditorAgent must at least have either of the pairs provided: SchemeName and Identification, or Name and PostalAddress.
  • Account Identification field usage:
    • SchemeName is a free-text field which will be populated with identification schemes an ASPSP accepts.
    • Identification is a field which is populated with the Identification of the account, using the valid identification scheme provided.
  • Valid UK Account Identification SchemeName values include, but are not restricted to:
    • "UK.OBIE.SortCodeAccountNumber" - The Identification field must be populated with the 6 digit Sort Code and 8 digit Account Number (a 14 digit field).
    • "UK.OBIE.IBAN" - The Identification field must be populated with the full IBAN.
    • "UK.OBIE.PAN" - The Identification field must be populated with the full PAN. A PAN may be an instrument (e.g., a debit card) linked to a payment account, and may not be the only PAN linked to the payment account.
  • The InstructedAmount object must be populated with the desired Amount and Currency of transfer, regardless of the currency of the DebtorAccount. I.e., a PSU may wish to transfer 100EUR from a GBP DebtorAccount (InstructedAmount will be 100EUR), or 100GBP in EUR (the InstructedAmount will be 100GBP).
  • The CurrencyOfTransfer must be used to specify the currency the funds will be transferred. I.e., a PSU may wish to transfer 100USD from a GBP DebtorAccount to a Rupee INR CreditorAccount in India.
  • The ChargeBearer field is used by the PISP to indicate the bearer of charges. An ASPSP must Reject the Initiation request if the requested charge allocation cannot be fulfilled.
  • Permission field is restricted to "Create", however, may be extended to "Update" and "Delete" in a future iteration of the specification.
# Data Dictionary
Name Occurrence XPath EnhancedDefinition Class Codes Pattern
OBInternationalStandingOrder4 OBInternationalStandingOrder4 The Initiation payload is sent by the initiating party to the ASPSP. It is used to request movement of funds from the debtor account to a creditor for an international standing order. OBInternationalStandingOrder4
Frequency 1..1 OBInternationalStandingOrder4/Frequency Individual Definitions: EvryDay - Every day EvryWorkgDay - Every working day IntrvlDay - An interval specified in number of calendar days (02 to 31) IntrvlWkDay - An interval specified in weeks (01 to 09), and the day within the week (01 to 07) WkInMnthDay - A monthly interval, specifying the week of the month (01 to 05) and day within the week (01 to 07) IntrvlMnthDay - An interval specified in months (between 01 to 06, 12, 24), specifying the day within the month (-05 to -01, 01 to 31) QtrDay - Quarterly (either ENGLISH, SCOTTISH, or RECEIVED). ENGLISH = Paid on the 25th March, 24th June, 29th September and 25th December. SCOTTISH = Paid on the 2nd February, 15th May, 1st August and 11th November. RECEIVED = Paid on the 20th March, 19th June, 24th September and 20th December. Individual Patterns: EvryDay (ScheduleCode) EvryWorkgDay (ScheduleCode) IntrvlDay:NoOfDay (ScheduleCode + NoOfDay) IntrvlWkDay:IntervalInWeeks:DayInWeek (ScheduleCode + IntervalInWeeks + DayInWeek) WkInMnthDay:WeekInMonth:DayInWeek (ScheduleCode + WeekInMonth + DayInWeek) IntrvlMnthDay:IntervalInMonths:DayInMonth (ScheduleCode + IntervalInMonths + DayInMonth) QtrDay: + either (ENGLISH, SCOTTISH or RECEIVED) ScheduleCode + QuarterDay The regular expression for this element combines five smaller versions for each permitted pattern. To aid legibility - the components are presented individually here: EvryDay EvryWorkgDay IntrvlDay:((0[2-9]) ([1-2][0-9]) 3[0-1]) IntrvlWkDay:0[1-9]:0[1-7] WkInMnthDay:0[1-5]:0[1-7] IntrvlMnthDay:(0[1-6] 12
Reference 0..1 OBInternationalStandingOrder4/Reference Unique reference, as assigned by the creditor, to unambiguously refer to the payment transaction. Usage: If available, the initiating party should provide this reference in the structured remittance information, to enable reconciliation by the creditor upon receipt of the amount of money. If the business context requires the use of a creditor reference or a payment remit identification, and only one identifier can be passed through the end-to-end chain, the creditor's reference or payment remittance identification should be quoted in the end-to-end transaction identification. Max35Text
NumberOfPayments 0..1 OBInternationalStandingOrder4/NumberOfPayments Number of the payments that will be made in completing this frequency sequence including any executed since the sequence start date. Max35Text
FirstPaymentDateTime 1..1 OBInternationalStandingOrder4/FirstPaymentDateTime The date on which the first payment for a Standing Order schedule will be made. ISODateTime
FinalPaymentDateTime 0..1 OBInternationalStandingOrder4/FinalPaymentDateTime The date on which the final payment for a Standing Order schedule will be made. ISODateTime
Purpose 0..1 OBInternationalStandingOrder4/Purpose Specifies the external purpose code in the format of character string with a maximum length of 4 characters. The list of valid codes is an external code list published separately. External code sets can be downloaded from www.iso20022.org. OBExternalPurpose1Code1
ExtendedPurpose 0..1 OBInternationalScheduled3/ExtendedPurpose Specifies the purpose of an international payment, when there is no corresponding 4 character code available in the ISO20022 list of Purpose Codes. Max140Text
ChargeBearer 0..1 OBInternationalStandingOrder4/ChargeBearer Specifies which party/parties will bear the charges associated with the processing of the payment transaction. OBChargeBearerType1Code BorneByCreditor BorneByDebtor FollowingServiceLevel Shared
CurrencyOfTransfer 1..1 OBInternationalStandingOrder4/CurrencyOfTransfer Specifies the currency of the to be transferred amount, which is different from the currency of the debtor's account. ActiveOrHistoricCurrencyCode ^[A-Z]{3,3}$
DestinationCountryCode 0..1 OBInternationalScheduled3/DestinationCountryCode Country in which Credit Account is domiciled. Nation with its own government. CountryCode ^[A-Z]{2,2}$
InstructedAmount 1..1 OBInternationalStandingOrder4/InstructedAmount Amount of money to be moved between the debtor and creditor, before deduction of charges, expressed in the currency as ordered by the initiating party. Usage: This amount has to be transported unchanged through the transaction chain. OBActiveOrHistoricCurrencyAndAmount
Amount 1..1 OBInternationalStandingOrder4/InstructedAmount/Amount A number of monetary units specified in an active currency where the unit of currency is explicit and compliant with ISO 4217. OBActiveCurrencyAndAmount_SimpleType ^\d{1,13}$|^\d{1,13}\.\d{1,5}$
Currency 1..1 OBInternationalStandingOrder4/InstructedAmount/Currency A code allocated to a currency by a Maintenance Agency under an international identification scheme, as described in the latest edition of the international standard ISO 4217 "Codes for the representation of currencies and funds". ActiveOrHistoricCurrencyCode ^[A-Z]{3,3}$
DebtorAccount 0..1 OBInternationalStandingOrder4/DebtorAccount Provides the details to identify the debtor account. OBCashAccountDebtor4
SchemeName 1..1 OBInternationalStandingOrder4/DebtorAccount/SchemeName Name of the identification scheme, in a coded form as published in an external list. OBExternalAccountIdentification4Code
Identification 1..1 OBInternationalStandingOrder4/DebtorAccount/Identification Identification assigned by an institution to identify an account. This identification is known by the account owner. Max256Text
Name 0..1 OBInternationalStandingOrder4/DebtorAccount/Name The account name is the name or names of the account owner(s) represented at an account level, as displayed by the ASPSP's online channels. Note, the account name is not the product name or the nickname of the account. Max350Text
SecondaryIdentification 0..1 OBInternationalStandingOrder4/DebtorAccount/SecondaryIdentification This is secondary identification of the account, as assigned by the account servicing institution. This can be used by building societies to additionally identify accounts with a roll number (in addition to a sort code and account number combination). Max34Text
Creditor 0..1 OBInternationalStandingOrder4/Creditor Party to which an amount of money is due. OBPartyIdentification43
Name 0..1 OBInternationalStandingOrder4/Creditor/Name Name by which a party is known and which is usually used to identify that party. Max350Text
PostalAddress 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress Information that locates and identifies a specific address, as defined by postal services. OBPostalAddress6
AddressType 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/AddressType Identifies the nature of the postal address. OBAddressTypeCode Business Correspondence DeliveryTo MailTo POBox Postal Residential Statement
Department 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/Department Identification of a division of a large organisation or building. Max70Text
SubDepartment 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/SubDepartment Identification of a sub-division of a large organisation or building. Max70Text
StreetName 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/StreetName Name of a street or thoroughfare. Max70Text
BuildingNumber 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/BuildingNumber Number that identifies the position of a building on a street. Max16Text
PostCode 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/PostCode Identifier consisting of a group of letters and/or numbers that is added to a postal address to assist the sorting of mail. Max16Text
TownName 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/TownName Name of a built-up area, with defined boundaries, and a local government. Max35Text
CountrySubDivision 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/CountrySubDivision Identifies a subdivision of a country such as state, region, county. Max35Text
Country 0..1 OBInternationalStandingOrder4/Creditor/PostalAddress/Country Nation with its own government. CountryCode ^[A-Z]{2,2}$
AddressLine 0..7 OBInternationalStandingOrder4/Creditor/PostalAddress/AddressLine Information that locates and identifies a specific address, as defined by postal services, presented in free format text. Max70Text
CreditorAgent 0..1 OBInternationalStandingOrder4/CreditorAgent Party that manages the account on behalf of the account owner, that is manages the registration and booking of entries on the account, calculates balances on the account and provides information about the account. This is the servicer of the beneficiary account. OBBranchAndFinancialInstitutionIdentification6
SchemeName 0..1 OBInternationalStandingOrder4/CreditorAgent/SchemeName Name of the identification scheme, in a coded form as published in an external list. OBExternalFinancialInstitutionIdentification4Code
Identification 0..1 OBInternationalStandingOrder4/CreditorAgent/Identification Unique and unambiguous identification of the servicing institution. Max35Text
Name 0..1 OBInternationalStandingOrder4/CreditorAgent/Name Name by which an agent is known and which is usually used to identify that agent. Max140Text
PostalAddress 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress Information that locates and identifies a specific address, as defined by postal services. OBPostalAddress6
AddressType 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/AddressType Identifies the nature of the postal address. OBAddressTypeCode Business Correspondence DeliveryTo MailTo POBox Postal Residential Statement
Department 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/Department Identification of a division of a large organisation or building. Max70Text
SubDepartment 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/SubDepartment Identification of a sub-division of a large organisation or building. Max70Text
StreetName 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/StreetName Name of a street or thoroughfare. Max70Text
BuildingNumber 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/BuildingNumber Number that identifies the position of a building on a street. Max16Text
PostCode 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/PostCode Identifier consisting of a group of letters and/or numbers that is added to a postal address to assist the sorting of mail. Max16Text
TownName 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/TownName Name of a built-up area, with defined boundaries, and a local government. Max35Text
CountrySubDivision 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/CountrySubDivision Identifies a subdivision of a country such as state, region, county. Max35Text
Country 0..1 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/Country Nation with its own government. CountryCode ^[A-Z]{2,2}$
AddressLine 0..7 OBInternationalStandingOrder4/CreditorAgent/PostalAddress/AddressLine Information that locates and identifies a specific address, as defined by postal services, presented in free format text. Max70Text
CreditorAccount 1..1 OBInternationalStandingOrder4/CreditorAccount Provides the details to identify the beneficiary account. OBCashAccountCreditor3
SchemeName 1..1 OBInternationalStandingOrder4/CreditorAccount/SchemeName Name of the identification scheme, in a coded form as published in an external list. OBExternalAccountIdentification4Code
Identification 1..1 OBInternationalStandingOrder4/CreditorAccount/Identification Identification assigned by an institution to identify an account. This identification is known by the account owner. Max256Text
Name 1..1 OBInternationalStandingOrder4/CreditorAccount/Name The account name is the name or names of the account owner(s) represented at an account level. Note, the account name is not the product name or the nickname of the account. OB: ASPSPs may carry out name validation for Confirmation of Payee, but it is not mandatory. Max350Text
SecondaryIdentification 0..1 OBInternationalStandingOrder4/CreditorAccount/SecondaryIdentification This is secondary identification of the account, as assigned by the account servicing institution. This can be used by building societies to additionally identify accounts with a roll number (in addition to a sort code and account number combination). Max34Text
SupplementaryData 0..1 OBInternationalStandingOrder4/SupplementaryData Additional information that can not be captured in the structured fields and/or any other specific block. OBSupplementaryData1

The OBWriteInternationalStandingOrderConsent6 object will be used for the call to:

  • POST /international-standing-order-consents

# UML Diagram

 OBWriteInternationalStandingOrderConsent6

# Notes

The international-standing-order-consent request contains these objects:

  • Initiation
  • Authorisation
  • SCASupportData
  • Risk

# Data Dictionary

Name Occurrence XPath EnhancedDefinition Class Codes Pattern
OBWriteInternationalStandingOrderConsent6 OBWriteInternationalStandingOrderConsent6 OBWriteInternationalStandingOrderConsent6
Data 1..1 OBWriteInternationalStandingOrderConsent6/Data OBWriteDataInternationalStandingOrderConsent6
Permission 1..1 OBWriteInternationalStandingOrderConsent6/Data/Permission Specifies the Open Banking service request types. OBExternalPermissions2Code Create
ReadRefundAccount 0..1 OBWriteInternationalStandingOrderConsent6/Data/ReadRefundAccount Specifies to share the refund account details with PISP OBReadRefundAccount1Code Yes No
Initiation 1..1 OBWriteInternationalStandingOrderConsent6/Data/Initiation The Initiation payload is sent by the initiating party to the ASPSP. It is used to request movement of funds from the debtor account to a creditor for an international standing order. OBInternationalStandingOrder4
Authorisation 0..1 OBWriteInternationalStandingOrderConsent6/Data/Authorisation OBAuthorisation1
SCASupportData 0..1 OBWriteInternationalStandingOrderConsent6/Data/SCASupportData Supporting Data provided by TPP, when requesting SCA Exemption. OBSCASupportData1
Risk 1..1 OBWriteInternationalStandingOrderConsent6/Risk The Risk section is sent by the initiating party to the ASPSP. It is used to specify additional details for risk scoring for Payments. OBRisk1

The OBWriteInternationalStandingOrderConsentResponse7 object will be used for a response to a call to:

  • POST /international-standing-order-consents
  • GET /international-standing-order-consents/{ConsentId}

# UML Diagram

 OBWriteInternationalStandingOrderConsentResponse7

# Notes

The international-standing-order-consent response contains the full original payload from the international-standing-order-consent request with the additional elements below:

  • ConsentId.
  • CreationDateTime the international-standing-order-consent resource was created.
  • Status and StatusUpdateDateTime of the international-standing-order-consent resource.
  • Permission field in the original request.
  • ReadRefundAccount field in the original request.
  • CutOffDateTime Behaviour is explained in Payment Initiation API Profile, Section - Payment Restrictions -> CutOffDateTime Behaviour.
  • Charges array which will be used by the ASPSP to indicate charges, and the ChargeBearer as relevant.
  • Post successful PSU Authentication, an ASPSP may provide Debtor/Name in the Payment Order Consent Response, even when the Payer didn't provide the Debtor Account via PISP.

# Data Dictionary

Name Occurrence XPath EnhancedDefinition Class Codes Pattern
OBWriteInternationalStandingOrderConsentResponse7 OBWriteInternationalStandingOrderConsentResponse7 OBWriteInternationalStandingOrderConsentResponse7
Data 1..1 OBWriteInternationalStandingOrderConsentResponse7/Data OBWriteDataInternationalStandingOrderConsentResponse7
ConsentId 1..1 OBWriteInternationalStandingOrderConsentResponse7/Data/ConsentId OB: Unique identification as assigned by the ASPSP to uniquely identify the consent resource. Max128Text
CreationDateTime 1..1 OBWriteInternationalStandingOrderConsentResponse7/Data/CreationDateTime Date and time at which the resource was created. ISODateTime
Status 1..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Status Specifies the status of resource in code form. OBExternalConsentStatus1Code Authorised AwaitingAuthorisation Consumed Rejected
StatusUpdateDateTime 1..1 OBWriteInternationalStandingOrderConsentResponse7/Data/StatusUpdateDateTime Date and time at which the resource status was updated. ISODateTime
Permission 1..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Permission Specifies the Open Banking service request types. OBExternalPermissions2Code Create
ReadRefundAccount 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/ReadRefundAccount Specifies to share the refund account details with PISP OBReadRefundAccount1Code Yes No
CutOffDateTime 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/CutOffDateTime Specified cut-off date and time for the payment consent. ISODateTime
Charges 0..n OBWriteInternationalStandingOrderConsentResponse7/Data/Charges Set of elements used to provide details of a charge for the payment initiation. OBCharge2
Initiation 1..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Initiation The Initiation payload is sent by the initiating party to the ASPSP. It is used to request movement of funds from the debtor account to a creditor for an international standing order. OBInternationalStandingOrder4
Authorisation 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Authorisation OBAuthorisation1
SCASupportData 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/SCASupportData Supporting Data provided by TPP, when requesting SCA Exemption. OBSCASupportData1
Debtor 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Debtor Set of elements used to identify a person or an organisation.
SchemeName 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Debtor/SchemeName Name of the identification scheme, in a coded form as published in an external list. OBExternalAccountIdentification4Code
Identification 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Debtor/Identification Identification assigned by an institution to identify an account. This identification is known by the account owner. Max256Text
Name 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Debtor/Name The account name is the name or names of the account owner(s) represented at an account level, as displayed by the ASPSP's online channels. Note, the account name is not the product name or the nickname of the account. Max350Text
SecondaryIdentification 0..1 OBWriteInternationalStandingOrderConsentResponse7/Data/Debtor/SecondaryIdentification This is secondary identification of the account, as assigned by the account servicing institution. This can be used by building societies to additionally identify accounts with a roll number (in addition to a sort code and account number combination). Max34Text
Risk 1..1 OBWriteInternationalStandingOrderConsentResponse7/Risk The Risk section is sent by the initiating party to the ASPSP. It is used to specify additional details for risk scoring for Payments. OBRisk1

# Usage Examples

# POST /international-standing-order-consents

# Request
POST /international-standing-order-consents HTTP/1.1
Authorization: Bearer 2YotnFZFEjr1zCsicMWpAA
x-idempotency-key: FRESCO.21302.GFX.20
x-jws-signature: TGlmZSdzIGEgam91cm5leSBub3QgYSBkZXN0aW5hdGlvbiA=..T2ggZ29vZCBldmVuaW5nIG1yIHR5bGVyIGdvaW5nIGRvd24gPw==
x-fapi-auth-date:  Mon, 01 Jan 2018 02:43:31 GMT
x-fapi-customer-ip-address: 104.25.212.99
x-fapi-interaction-id: 93bac548-d2de-4546-b106-880a5018460d
Content-Type: application/json
Accept: application/json
{
  "Data": {
	"Permission": "Create",
  "ReadRefundAccount": "Yes",
    "Initiation": {
	  "Frequency": "EvryWorkgDay",
	  "FirstPaymentDateTime": "2018-06-06T06:06:06+00:00",
	  "FinalPaymentDateTime": "2020-03-20T06:06:06+00:00",
	  "DebtorAccount": {
        "SchemeName": "UK.OBIE.SortCodeAccountNumber",
        "Identification": "11280001234567",
        "Name": "Andrea Frost"
      },
      "CreditorAccount": {
        "SchemeName": "UK.OBIE.IBAN",
        "Identification": "DE89370400440532013000",
        "Name": "Tom Kirkman"
      },
	  "InstructedAmount": {
        "Amount": "20",
        "Currency": "EUR"
	  },
	  "CurrencyOfTansfer":"EUR"
    }
  },
  "Risk": {
    "PaymentContextCode": "TransferToThirdParty"
  }
}
# Response
HTTP/1.1 201 Created
x-jws-signature: V2hhdCB3ZSBnb3QgaGVyZQ0K..aXMgZmFpbHVyZSB0byBjb21tdW5pY2F0ZQ0K
x-fapi-interaction-id: 93bac548-d2de-4546-b106-880a5018460d
Content-Type: application/json
{
  "Data": {
	"ConsentId": "ISOC-100",
	"CreationDateTime": "2018-01-01T06:06:06+00:00",
	"Status": "AwaitingAuthorisation",
	"StatusUpdateDateTime": "2018-01-01T06:06:06+00:00",
	"Permission": "Create",
  "ReadRefundAccount": "Yes",
    "Initiation": {
	  "Frequency": "EvryWorkgDay",
	  "FirstPaymentDateTime": "2018-06-06T06:06:06+00:00",
	  "FinalPaymentDateTime": "2020-03-20T06:06:06+00:00",
      "DebtorAccount": {
        "SchemeName": "UK.OBIE.SortCodeAccountNumber",
        "Identification": "11280001234567",
        "Name": "Andrea Frost"
      },
      "CreditorAccount": {
        "SchemeName": "UK.OBIE.IBAN",
        "Identification": "DE89370400440532013000",
        "Name": "Tom Kirkman"
      },
	  "InstructedAmount": {
        "Amount": "20",
        "Currency": "EUR"
	  },
	  "CurrencyOfTansfer":"EUR"
    }
  },
  "Risk": {
    "PaymentContextCode": "TransferToThirdParty"
  },
  "Links": {
    "Self": "https://api.alphabank.com/open-banking/v3.1/pisp/international-standing-order-consents/ISOC-100"
  },
  "Meta": {}
}